Fire Safety: Choosing the Right Fire Extinguisher

choosing the right fire extinguisher

Explore this post with your favourite AI tool:

Share this article with AI tools to summarise, remember, or explore the content further.

There are five main types of fire extinguisher, commonly used to tackle a blaze. But choosing the right fire extinguisher is vital. It could mean the difference between putting out the flames or making the situation worse. Using the wrong fire extinguisher can fuel a fire, spread burning liquids further, or even cause a dangerous electric shock. The most important factor is to have the right fire extinguisher for the medium you are going to put out.

So, what are the five main five extinguishers?

  1. Water

The red label fire extinguisher is water, and is used for wood, paper or textiles. If you have lots of cardboard or paper in your building, you will need have the water fire extinguisher to hand. Must not be used on flammable liquids or live electrical equipment.

  • CO2

The black label fire extinguisher is CO2, for use on flammable liquids or live electrical equipment. It must not be used in a confined space.

  • Foam

Foam, cream label, can be used on wood, textiles, paper, and flammable liquids but not on live electrical equipment.

  • Dry powder

The blue label, the dry powder extinguisher, can be used on wood, textiles, paper, gaseous fires, live electrical equipment and flammable liquids. However, it is currently being phased out as it is an inhalation risk so cannot be used in small spaces.

  • Wet chemical

Yellow label fire extinguishers are wet chemical extinguishers, predominantly used for cooking oil fires. These are also gradually being phased out as they were historically used for the deep fat fryer, and many people now choose air fryers instead. Commercial kitchens still use them. Air fryers are a much safer way to cook as the heat is contained in a unit with the drawer shut so oxygen is limited and is unlikely to fuel a fire.

Training on the right fire extinguisher is key

All staff need to know which fire extinguisher to choose, depending on the medium on fire. For example, if someone chose a water extinguisher for an electric fire, the electricity can arc through the water and cause severe electrocution.

It is vital that staff only use a fire extinguisher if they have the knowledge and training to do so.

Therefore, training is vital so that people have the knowledge and confidence to tackle a blaze. With the right training and by choosing the right fire extinguisher, a fire could be out within a minute, without that it could lead to a whole room on fire, or worse.

There are plans in the pipeline for a universal fire extinguisher of deionised water or foam that can be used on anything, however this is still in development and hasn’t yet been approved by British Standards.

For more information on fire safety or for advice on what your business might need, contact us 01604 344569.


More Health and Safety Articles

managing health and safety

5 easy steps for smaller businesses in managing health and safety

Managing health and safety can be daunting for smaller businesses with limited resources, but by implementing a few health and safety basics you can get to grips with your obligations as an employer and comply with the regulations.

But where do you start with health and safety as a smaller organisation? Here are a few essential steps to take.

You need to appoint somebody competent, and with some knowledge and experience in this area, to manage health and safety in your business. If there’s nobody suitable you could appoint an external…

Read more

Fire Risk Assessments

Fire Risk Assessment – not just another tick box exercise

A fire risk assessment plays a fundamental role in our national health and safety regime. A fire rsik assessment is a mandatory requirement for commercial, industrial, and all other non-domestic premises. When used correctly a fire risk assessment can safeguard our workforces and help employers, landlords, and owners of non-residential buildings to meet their legal obligations.

If you’re responsible for dealing with the fire risks in your business it’s important to understand the actions you need to take, as failing to comply with the law has…

Read more

CDM Consultants

Are you a duty holder under CDM 2015? Here’s what you need to do

The UK Construction (Design & Management) regime was introduced to improve health and safety during construction projects. The latest version of the legislation, which took effect in 2015, brought in some changes, and if you’re a duty holder under CDM it’s important to understand your role within a project.

Failing to comply with CDM regulations has serious ramifications including hefty fines, and the potential for litigation and criminal charges in some cases. The Health and Safety Executive (HSE) is the body responsible for managing…

Read more